[1]张慧萍,任毅,薛富国,等. 低温微量润滑加工技术[J].哈尔滨理工大学学报,2019,(02):38-44.[doi:10.15938/j.jhust.2019.02.007]
 ZHANG Hui ping,REN Yi,XUE Fu guo,et al. Cryogenic Minimum Quantity Lubrication Processing Technology[J].哈尔滨理工大学学报,2019,(02):38-44.[doi:10.15938/j.jhust.2019.02.007]
点击复制

 低温微量润滑加工技术()
分享到:

《哈尔滨理工大学学报》[ISSN:1007-2683/CN:23-1404/N]

卷:
期数:
2019年02期
页码:
38-44
栏目:
机械动力工程
出版日期:
2019-04-25

文章信息/Info

Title:
 Cryogenic Minimum Quantity Lubrication Processing Technology
文章编号:
1007-2683(2019)02-0038-07
作者:
 张慧萍任毅薛富国 刘壬航
1.哈尔滨理工大学 机械动力工程学院,黑龙江 哈尔滨 150080;
2.美国东密歇根大学 工程技术学院, 密歇根 伊普西兰蒂 48197
Author(s):
 ZHANG HuipingREN YiXUE FuguoLIU Renhang
1School of Mechanical Power Engineering, Harbin University of Science and Technology, Harbin 150080, China;
2School of Engineering Technology, Eastern Michigan University, Ypsilanti 48197, USA.
关键词:
 绿色切削低温微量润滑切削特性润滑机理
Keywords:
 green cutting cryogenic minimum quantity lubrication cutting property lubricant mechanism
分类号:
TG391
DOI:
10.15938/j.jhust.2019.02.007
文献标志码:
A
摘要:
低温微量润滑加工技术(CMQL)是一种新型的切削技术,在绿色制造中占有着举足轻重的地位。它完美地继承微量润滑技术与低温冷风切削技术的优点,在加工过程中具有良好的特性。低温微量润滑技术在降低切削温度,减小切削力、提升润滑效果的同时,还使已加工表面的表面质量提高,并且了改善切屑形态,尤其在难加工材料切削加工时,更体现出其卓越的性能。低温微量润滑技术使企业在清洁绿色加工中,一方面能保证环保,另一方面又能获得巨大的经济效益。另外,低温微量润滑技术秉承绿色制造的宗旨,既不会对人类健康产生危害,同时将环境污染降到最低。随着绿色制造技术的不断发展,低温微量润滑技术作为一种绿色切削技术倍受青睐,在提高生产效益、减少资源消耗和环境污染方面必将产生深远的影响。
Abstract:
 An important green cutting technology called cryogenic minimum quantity of lubricant (CMQL) plays a very important role in Green Manufacturing CMQL incorporates advantages from cryogenic wind and minimal quantity of lubricant (MQL) and shows good cutting property in the cutting process CMQL can reduce the cutting force and cutting temperature and increase the lubrication effect while improving the surface quality and chip morphology Especially in the process of machining difficulttocut materials, it has unique advantages over other technologies Enterprises will not only protect environment but also make huge economic benefits by this clean cutting technology In addition, CMQL inherits the spirit of green manufacturing This technology does no harm to human health, but also minimizes environmental pollution It will become more popular in the development of Green Manufacturing and have great significance on the improvement of production efficiency, reduction of energy consumption and environment pollution.

参考文献/References:

[1]牛晓钦, 王春燕 低温微量润滑切削技术及其应用[J]. 机械工程与自动化, 2011(1):212
[2]冯丽 绿色机械加工技术的运用和发展探讨[J]. 科技传播, 2014(6):43
[3]陈超, 黄建龙 基于环境意识的绿色切削加工技术[J]. 机械设计与制造, 2010(9):123
[4]刘献礼, 岳彩旭 绿色切削技术的研究进展与发展趋势[J]. 航空制造技术, 2010(11):26
[5]王君, 丁飞彪, 高俊 浅谈绿色机械加工技术的应用与发展[J]. 科技与企业, 2013(4):258
[6]吴敏镜 21世纪的切削刀具[J]. 航空精密制造技术, 2002(5):1
[7]DURVAL U B J3, DINIZ A E, GILBERTO W A, et alUsing a Minimum Quantity of Lubricant (MQL) and a Diamond Coated Tool in the Drilling of Aluminumsilicon Alloys[J]. Journal of Materials Processing Technology, 2002, 122(1):127
[8]横田秀雄, 吴敏镜 MQL切削的现状和发展 航空精密制造技术, 2004, 40 (1):24
[9]杨颖 低温冷风在绿色加工中应用的若干问题研究[D]. 重庆:重庆大学, 2004
[10]李吉林 低温冷风微量润滑技术在钛合金车削加工中的应用研究[D]. 西安:西安石油大学, 2014 
[11]WILLIAMS, J A, TABOR D The Role of Lubricants in Machining[J] Wear, 1977(43):275
[12]GODLEVIAKI V A, VOLKOV A V The Kinetics of Lubricant Penetration Action during Machining[J]. Lubrication Science, 1997, 9(2):127
[13]黄伟 低温冷风MQL技术中微量润滑机理研究[J]. 科技视界, 2015(16):67
[14]苏宇 低温最小微量润滑高速铣削钛合金的试验研究[D]. 南京:南京航空航天大学, 2010
[15]贺爱东, 叶邦彦, 王子媛 低温微量润滑切削304不锈钢的实验研究[J]. 润滑与密封, 2015(6):100 
[16]TAE J K,HEE S K Oil Cooling Method for Turning of Hardened Material[J]. International Journal of Advanced Manufacturing Technology 1999, (15):470
[17]KOVACEVIC R, CHERUKUTHOTA C, MZURKIEWIEZ M High Pressure Water Jet Cooling Lubrication to Improve Machining Effciency in Milling[J]. International Journal of Machine Tools and Manufacture 1995, 35(10):1459
[18]ISKANDAR Y, ATTIA A, HENDRICK M H, et al Flow Visualization and Characterization for Optimized MQL Machining of Composites[J]. CIRP AnnalsManufacturing Technology 2014, 63 (1):77
[19]MARUDA W RADOSLAW, LEGUTKO Stanislaw, KROLCZYK Grzegorz Effect of Minimum Quantity Cooling Lubrication (MQCL) on Chip Morphology and Surface Roughness in Turning Low Carbon Steels[J]. Engineering Solutions and Technologies in Manufacturing 2014(657):38
[20]ELSHWAIN, AEI REDZUAN, NORIZAH Effect of Cooling Lubrication Using Cooled Air, MQL + Cooled Air, N2 and CO2 Gases on Tool Life and Surface Finish in Machininga Review[J]. Advanced Materials Research, 2014(845):889
[21]YOGIERinaldy, BOSWELL Brian, BISWAS Wahidul, ISLAM Nazrul Advancing Environmentally Conscious Machining[J]. 2015(26):391
[22]ZHANG Chenliang, ZHANG Song, YAN Xufan Effects of Internal Cooling Channel Structures on Cutting Forces and Tool Life in Side Milling of H13 Steel under Cryogenic Minimum Quantity Lubrication Condition[J]. International Journal of Advanced Manufacturing Technology, 2016(83):975
[23]YUAN S M, Yan L T, Liu, W D Effects of Cooling Air Temperature on Cryogenic Machining of Ti6Al4V Alloy[J]. Journal of Materials Processing Technology 2011,211(3):356
[24]ZHANG Xiaohong, XIA Chong, CHEN Peng Comparative Experimental Research on Cryogenic Gear Hobbing with MQL[J]. Advanced Mechanical Research, 2012(479/481):2259
[25]GINTIN YR, BOSWELL B, BISWAS W, ISLAM MN, Investigation into Alternative Cooling Methods for Achieving Environmentally Friendly Machining Process[J]. Procedia CIRP, 2015(29):645
[26]HO Jihng Kuo, TSAI Che Hsiung, TSAI Ming Yi Development of a Novel Cooling Systemassisted Minimum Quantity Lubrication Method for Improvement of Milling Performance[J]. Journal of the Chinese Institute of Engineers 2015,38(3):322
[27]LIU Zhiqiang, CHEN Ming, AN Qinglong Investigation of Friction in Endmilling of Ti6Al4V under Different Green Cutting Conditions[J]. International Journal of Advanced Manufacturing Technology 2015, 78(5/8):1181
[28]ALVES M C S, BIANCHI E C, AGUIAR P R Influence of Optimized Lubricationcooling and Minimum Quantity Lubrication on the Cutting Forces, on the Geometric Quality of the Surfaces and on the Microstructural Integrity of Hardened Steel Parts[J]. 2011, 16(3):754 
[29]RABIEI F, RAHIMI AR, HADAD MJ, et al Performance Improvement of Minimum Quantity Lubrication (MQL) Technique in Surface Grinding by Modeling and Optimization[J]. Journal of Cleaner Production,2015(86):447
[30]LIN Haisheng, WANG Chengyong, YUAN Yaohui, et al Tool Wear in Ti6Al4V Alloy Turning under Oils on Water Cooling Comparing with Cryogenic Air Mixed with Minimal Quantity Lubrication[J]. International Journal of Advanced Manufacturing Technology, 2015, 81(1/4):87
[31]GHOSH S, RAO P Application of Sustainable Techniques in Metal Cutting for Enhanced Machinability: A review[J]. Journal of Cleaner Production 2015(100):17
[32]戚宝运, 何宁, 李亮, 等 低温微量润滑技术及其作用机理研究[J]. 机械科学与技术, 2010(6):826
[33]邹林涛 低温MQL流体动力学分析及冷却润滑性能研究[D]. 济南:山东大学, 2013
[34]苏宇, 何宁, 李亮 低温最小量润滑供给装置及其性能测试[J]. 工具技术, 2010(10):54
[35]李伟兴 低温微量润滑技术在内冷刀具应用研究[J]. 装备制造技术, 2014(5):107
[36]冯彦锋, 付国华, 魏庆元 难加工材料的切削加工[J]. 汽轮机技术, 1997,39(1):61
[37]陆颖, 王继先, 高航 基于环保的“绿色”冷却技术的新进展[J]. 机械设计与制浩, 2000(5):65
[38]康晓峰, 翟南, 初宏震, 等 低温MQL技术在TA15铣削加工中的应用研究[J]. 制造技术与机床, 2012(6):56
[39]袁松梅, 刘思, 严鲁涛 低温微量润滑技术在几种典型难加工材料加工中的应用[J]. 航空制造技术, 2011(14):45
[40]王延军, 赵新泽, 陈洪军 一种新型微乳化绿色切削液研究[J]. 润滑与密封,2006, 31(5):142
[41]MATTHEW Siniawsk, CHRIS Bowman Metal Working Fluids: Finding Green in the Manufacturing Process[J]. Industrial Lubrication and Tribology, 2009, 61(2):60
[42]SREEJITHP S Machining of 6061 Aluminum Alloy with MQL, Dry and Flooded Lubricant Conditions[J]. Materials Letters, 2008(62):276
[43]Yakup Yildiz, Muammer NalbanL A Review of Cryogenic Cooling in Machining Processes[J]. Machine Tools & Manufacture, 2008(48):947
[44]席俊杰, 陈华辉, 吴中 绿色切削技术的发展及应用[J]. 润滑与密封, 2006,31(2):181
[45]康征 微量润滑车削加工过程与表面完整性实验研究[D]. 上海:上海交通大学,2011

相似文献/References:

[1]孙永全,郭建英,陈洪科,等.AMSAA模型可靠性增长预测方法的改进[J].哈尔滨理工大学学报,2010,(05):49.
 SUN Yong-quan,GUO Jian-ying,CHEN Hong-ke,et al.An Improved Reliability Growth Prediction Algorithm Based on AMSAA Model[J].哈尔滨理工大学学报,2010,(02):49.
[2]滕志军,李晓霞,郑权龙,等.矿井巷道的MIMO信道几何模型及其信道容量分析[J].哈尔滨理工大学学报,2012,(02):14.
 TENG Zhi-jun,LI Xiao-xia,ZHENG Quan-long.Geometric Model for Mine MIMO Channels and Its Capacity Analysis[J].哈尔滨理工大学学报,2012,(02):14.
[3]李艳苹,张礼勇.新训练序列下的改进OFDM符号定时算法[J].哈尔滨理工大学学报,2012,(02):19.
 LI Yan-ping,ZHANG Li-yong.An Improved Algorithm of OFDM Symbol Timing Based on A New Training Sequence[J].哈尔滨理工大学学报,2012,(02):19.
[4]赵彦玲,车春雨,铉佳平,等.钢球全表面螺旋线展开机构运动特性分析[J].哈尔滨理工大学学报,2013,(01):37.
 ZHAO Yan-ling,CHE Chun-yu,XUAN Jia-ping,et al.[J].哈尔滨理工大学学报,2013,(02):37.
[5]李冬梅,卢旸,刘伟华,等.一类具有连续接种的自治SEIR传染病模型[J].哈尔滨理工大学学报,2013,(01):73.
 LI Dong-mei,LU Yang,LIU Wei-hua.[J].哈尔滨理工大学学报,2013,(02):73.
[6]华秀英,刘文德.奇Hamiltonian李超代数偶部的非负Z-齐次导子空间[J].哈尔滨理工大学学报,2013,(01):76.
 HUA Xiu-ying,LIU Wen-de.[J].哈尔滨理工大学学报,2013,(02):76.
[7]桂存兵,刘洋,何业军,等.基于LCC谐振电路阻抗匹配的光伏发电最大功率点跟踪[J].哈尔滨理工大学学报,2013,(01):90.
 GUI Cun-bing,LIU Yong,HE Ye-jun.[J].哈尔滨理工大学学报,2013,(02):90.
[8]翁凌,闫利文,夏乾善,等.PI/TiC@Al2O3复合薄膜的制备及其电性能研究[J].哈尔滨理工大学学报,2013,(02):25.
 WENG Ling,YAN Li-wen,XIA Qian-shan.[J].哈尔滨理工大学学报,2013,(02):25.
[9]姜彬,林爱琴,王松涛,等.高速铣刀安全性设计理论与方法[J].哈尔滨理工大学学报,2013,(02):63.
 JIANG Bin,LIN Ai-qin,WANG Song-tao,et al.[J].哈尔滨理工大学学报,2013,(02):63.
[10]李星纬,李晓东,张颖彧,等.EVOH 磺酸锂电池隔膜的制备及微观形貌[J].哈尔滨理工大学学报,2013,(05):18.
 LI Xing- wei,LI Xiao- dong,ZHANG Ying- yu,et al.The Preparation and Microcosmic Morphology oEVOH- SO Li Lithium Ion Battery Septum[J].哈尔滨理工大学学报,2013,(02):18.

备注/Memo

备注/Memo:
 

收稿日期:2016-11-22
基金项目:国家自然科学基金(51575145)
作者简介:
任毅(1992—),男,硕士研究生;
薛富国(1957—),男,博士,教授
通信作者:
张慧萍(1973—),女,博士,副教授,E-mail:zhping302@163.com



更新日期/Last Update: 2019-05-17