[1]孙全颖,曹菲菲,马明明,等. 剪切型四棱转子仿真分析及优化[J].哈尔滨理工大学学报,2019,(02):33-37.[doi:10.15938/j.jhust.2019.02.006]
 SUN Quan ying,CAO Fei fei,MA Ming ming,et al. Simulation Analysis and Optimization of the Shearing Type of Quadrangular Rotor[J].哈尔滨理工大学学报,2019,(02):33-37.[doi:10.15938/j.jhust.2019.02.006]
点击复制

 剪切型四棱转子仿真分析及优化()
分享到:

《哈尔滨理工大学学报》[ISSN:1007-2683/CN:23-1404/N]

卷:
期数:
2019年02期
页码:
33-37
栏目:
机械动力工程
出版日期:
2019-04-25

文章信息/Info

Title:
 Simulation Analysis and Optimization of the Shearing Type of Quadrangular Rotor
文章编号:
1007-2683(2019)02-0033-05
作者:
 孙全颖曹菲菲马明明王天鹏周宗平
 哈尔滨理工大学 机械动力工程学院,黑龙江 哈尔滨 150080
Author(s):
 SUN QuanyingCAO FeifeiMA MingmingWANG TianpengZHOU Zongping
 (School of Mechanical and Power Engineering,Harbin University of Science and Technology,Harbin 150080,China)
关键词:
 剪切型四棱转子强度分析模态分析临界转速优化
Keywords:
 rectangular shear rotor strength analysis modal analysis critical speed optimization
分类号:
TH123
DOI:
10.15938/j.jhust.2019.02.006
文献标志码:
A
摘要:
 为了提高混炼机转子工作的可靠性和稳定性,获得满足设计要求的剪切型四棱转子。运用Solidworks Simulation模块对橡胶混炼机的剪切型四棱转子进行了静力学分析和模态分析,获得了该转子的应力、变形分布规律以及临界转速范围。并且在有限元分析的基础上,采用评估优化算法对其进行了优化设计,优化结果表明剪切型四棱转子强度提高了50%,刚度增加了153%,共振转速区间减小了46%,该分析结果对橡胶混炼机的剪切型四棱转子的结构优化和改进具有一定的指导意义。
Abstract:
 In order to improve the reliability and stability of the mixer rotor, to meet the design requirements of the sheartype foursided rotor, in work this paper, the static analysis and modal analysis of the shearing type of quadrangular rotor were carried out by using Solidworks Simulation module, and we obtained the rotor stress and deformation distribution and critical speed range The optimization algorithm was used to optimize the design based on the finite element analysis, the results show that the shear strength of rectangular rotor strength increased by 50%, the stiffness increased 153%, the resonance speed interval is reduced by 46%, and the analysis results have certain guiding significance for the structural optimization and improvement of the shearing type of quadrangular rotor.

参考文献/References:

[1]李利,王显林.密炼机转子构型与混炼性能的关系[J].橡胶工业,2013,60(11):688.
[2]张作利.密炼机转子对混炼能力的影响[J].橡胶工业,2009,20(6):303.
[3]KE juan Chen, YANG Hongyu, LU Zheng. Study on Simulative Design in Mixer Rotor Based on Rheological
Theory [J]. Advanced Design and Manufacture to Gain a Competitive Edge,2008,7(2):355.
[4]路征,陈可娟. 密炼机转子几何构型优化设计方法研究[J].现代橡胶技术,2009,35(8):8.
[5]王兴天塑料机械设计与选用手册[S].
[6]汪传生基于UG的六棱转子有限元分析[J].橡胶工业,2008,55(4):242
[7]汲方林基于Simulation的测斜钻杆静态分析及优化设计[J].矿山机械,2014,42(3):16
[8]李岩基于SolidWorks的矿用隔爆电池箱壳体优化设计[J].工况自化,2011,2(2):74
[9]ZHDANOV V L, CHORNYI A D, HASSEL E. Analysis of the Process of Mixing of a Passive Impurity in a Jet Mixer[J]. Journal of Engineering Physics and Thermophysics,2007,80(2):46.
[10]边慧光,刘明霞.四棱同步转子有限元分析[J].塑料技术与装备,2006,32(6):1.
[11]宫文峰,黄美发,张美玲,等 基ANSYS Workbench的倒装键合机饭金件模态分析与实验[J].机械设计,2014,31(8):101
[12]熊杰,官文Ansys的橡胶密炼机转子转速范围分析[J].时代农机,2015,42(11):58
[13]杨文超,刘庆燕,汪传生小型密炼机同步转子的临界转速有限元分析[J].世界橡胶工业,2008,21(4) :17
[14]陈国栋,汪传生.同步转子密炼机转子转速的确定[J].世界橡胶工业,2010,37(4):32.
[15]孙全颖机械优化设计[M].哈尔滨:哈尔滨工业大学出版社,2007:1 
[16]孙颖,潘江如基于SolidWorks的平衡架仿真分析及优化[J].Value Engineering,2013,11(1):12

相似文献/References:

[1]孙永全,郭建英,陈洪科,等.AMSAA模型可靠性增长预测方法的改进[J].哈尔滨理工大学学报,2010,(05):49.
 SUN Yong-quan,GUO Jian-ying,CHEN Hong-ke,et al.An Improved Reliability Growth Prediction Algorithm Based on AMSAA Model[J].哈尔滨理工大学学报,2010,(02):49.
[2]滕志军,李晓霞,郑权龙,等.矿井巷道的MIMO信道几何模型及其信道容量分析[J].哈尔滨理工大学学报,2012,(02):14.
 TENG Zhi-jun,LI Xiao-xia,ZHENG Quan-long.Geometric Model for Mine MIMO Channels and Its Capacity Analysis[J].哈尔滨理工大学学报,2012,(02):14.
[3]李艳苹,张礼勇.新训练序列下的改进OFDM符号定时算法[J].哈尔滨理工大学学报,2012,(02):19.
 LI Yan-ping,ZHANG Li-yong.An Improved Algorithm of OFDM Symbol Timing Based on A New Training Sequence[J].哈尔滨理工大学学报,2012,(02):19.
[4]赵彦玲,车春雨,铉佳平,等.钢球全表面螺旋线展开机构运动特性分析[J].哈尔滨理工大学学报,2013,(01):37.
 ZHAO Yan-ling,CHE Chun-yu,XUAN Jia-ping,et al.[J].哈尔滨理工大学学报,2013,(02):37.
[5]李冬梅,卢旸,刘伟华,等.一类具有连续接种的自治SEIR传染病模型[J].哈尔滨理工大学学报,2013,(01):73.
 LI Dong-mei,LU Yang,LIU Wei-hua.[J].哈尔滨理工大学学报,2013,(02):73.
[6]华秀英,刘文德.奇Hamiltonian李超代数偶部的非负Z-齐次导子空间[J].哈尔滨理工大学学报,2013,(01):76.
 HUA Xiu-ying,LIU Wen-de.[J].哈尔滨理工大学学报,2013,(02):76.
[7]桂存兵,刘洋,何业军,等.基于LCC谐振电路阻抗匹配的光伏发电最大功率点跟踪[J].哈尔滨理工大学学报,2013,(01):90.
 GUI Cun-bing,LIU Yong,HE Ye-jun.[J].哈尔滨理工大学学报,2013,(02):90.
[8]翁凌,闫利文,夏乾善,等.PI/TiC@Al2O3复合薄膜的制备及其电性能研究[J].哈尔滨理工大学学报,2013,(02):25.
 WENG Ling,YAN Li-wen,XIA Qian-shan.[J].哈尔滨理工大学学报,2013,(02):25.
[9]姜彬,林爱琴,王松涛,等.高速铣刀安全性设计理论与方法[J].哈尔滨理工大学学报,2013,(02):63.
 JIANG Bin,LIN Ai-qin,WANG Song-tao,et al.[J].哈尔滨理工大学学报,2013,(02):63.
[10]李星纬,李晓东,张颖彧,等.EVOH 磺酸锂电池隔膜的制备及微观形貌[J].哈尔滨理工大学学报,2013,(05):18.
 LI Xing- wei,LI Xiao- dong,ZHANG Ying- yu,et al.The Preparation and Microcosmic Morphology oEVOH- SO Li Lithium Ion Battery Septum[J].哈尔滨理工大学学报,2013,(02):18.

备注/Memo

备注/Memo:
 

收稿日期:2016-11-23
基金项目:
国家自然科学基金(51375123);黑龙江省教育厅科学技术研究项目(12541166).
作者简介:
曹菲菲(1990—),女,硕士研究生;
马明明(1988—),男,硕士研究生
通信作者:
孙全颖(1960—),男,教授,硕士研究生导师,E-mail:sunquanying@hitgt.com



更新日期/Last Update: 2019-05-17