[1]赵新通,马明骁. 焊接烟气水浴净化装置结构分析与优化[J].哈尔滨理工大学学报,2019,(02):14-20.[doi:10.15938/j.jhust.2019.02.003]
 Structure Analysis and Optimization of Welding Fume Water Bath Cleaning Device.[J].哈尔滨理工大学学报,2019,(02):14-20.[doi:10.15938/j.jhust.2019.02.003]
点击复制

 焊接烟气水浴净化装置结构分析与优化()
分享到:

《哈尔滨理工大学学报》[ISSN:1007-2683/CN:23-1404/N]

卷:
期数:
2019年02期
页码:
14-20
栏目:
机械动力工程
出版日期:
2019-04-25

文章信息/Info

文章编号:
1007-2683(2019)02-0014-07
作者:
赵新通马明骁
 (哈尔滨理工大学 机械动力工程学院,黑龙江 哈尔滨 150080)
Author(s):
Structure Analysis and Optimization of Welding Fume Water Bath Cleaning Device
ZHAO Xintong,MA Mingxiao
关键词:
框架结构模态分析静力分析瞬态动力学分析
Keywords:
framework structure modal analysis static load analysis transientdynamic analysis
分类号:
TH122
DOI:
10.15938/j.jhust.2019.02.003
文献标志码:
A
摘要:
针对目前焊接烟尘处理问题,设计了利用水浴方式净化焊接烟尘的水浴净化装置。利用UG对焊接烟气水浴净化装置进行设计建模,利用ADAMS、ANSYS分析结构在静置工况、搬运倾斜工况、搬运时路面冲击等工况下的结构变形与受力情况。静力分析表明选用型材的材料性能没有被充分利用,经瞬态动力学分析表明,在净化机受到路面冲击载荷时脚轮支架所受应力最大,整体结构所受影响最小。根据分析结果在进行优化时主要对结构进行静力分析,优化结果表明选用2020型材即可满足结构强度要求。并对优化后结构进行模态分析,得到各阶的共振频率为风机选型提供依据。
Abstract:
Abstract:Aiming at the problem of welding fume treatment, a water bath purification device is designed to purify welding fume by water bath UG is used to design and build a model of the welding fume water bath purification device, and the structure deformation and stress condition of the structure under static working condition. The handling tilting condition and moving road impact are analyzed by using ADAMS and ANSYS The static analysis shows that the material properties of selected profiles are not fully utilized, the transient dynamic analysis showed that in the purifying machine by the road surface impact load truckle bracket and the maximum stress, the overall structure of the least affected by So, according to the results of the analysis in the optimization of the structure of static analysis, the optimization results show that the selected 2020 profiles can meet the requirements of structural strength, and the optimized structure modal analysis, provide the basis for the selection of fan get resonance frequency of each order

参考文献/References:

[1]张亮.垃圾焚烧炉烟气净化用袋式除尘布料的试验研究[D].上海;东华大学,2006.
[2]中国环境保护产业协会袋式除尘委员会.袋式除尘行业发展情况综述[C]//中国环境保护产业协会袋式除尘委员会,2002:1.
[3]汤华玲,刘红,鞠红梅.造船业电焊工尘肺发病情况分析[J].中华劳动卫生职业病杂志,2008,26(4):2.
[4]许本文,焦群英.机械振动与模态分析基础[M]. 北京:机械工业出版社,1998.
[5]袁越锦,徐英英,张艳华.ANSYS Workbench14.0建模仿真技术及实例详解[M]. 北京:化学工业出版社,2013.
[6]龚曙光,谢桂兰.ANSYS操作命令与参数化编程[M].北京:机械工业出版社,2004.
[7]陈正,李红勋,高朝旺,等.基于Ansys Workbench某运输车车架的有限元分析[J].农业装备与车辆工程,2012,50(12):44.
[8]HONG Hee Yoo Jung Eun Cho Jintai Chung.Modal Analysis and Shape Optimization of Rotating Cantilever Beams[J].Journal of Sound and Vibration,2006,290(1/2):21.
[9]何小兵,张赤斌,颜肖龙.车载机柜的动力学分析[J].机械工程与自动化,2006.
[10]张永林,钟毅芳.车辆路面不平度输入的随机激励时域模型[J].农业机械学报,2004, 35(2):9.

相似文献/References:

[1]陈再发. 汽车刹车制动盘形状优化设计[J].哈尔滨理工大学学报,2018,(03):128.[doi:10.15938/j.jhust.2018.03.022]
 CHEN Zai fa. Shape Optimization Design of Brake System Based on Opti Struct[J].哈尔滨理工大学学报,2018,(02):128.[doi:10.15938/j.jhust.2018.03.022]
[2]吴雪峰,马路,苑忠亮,等. BTA深孔钻的结构优化及切削仿真分析[J].哈尔滨理工大学学报,2018,(04):18.[doi:10.15938/j.jhust.2018.04.004]
 WU Xue feng,MA Lu,YUAN Zhong liang,et al. Structural Optimization and Cutting Simulation Analysis of BAT Deephole Drilling[J].哈尔滨理工大学学报,2018,(02):18.[doi:10.15938/j.jhust.2018.04.004]
[3]孙全颖,曹菲菲,马明明,等. 剪切型四棱转子仿真分析及优化[J].哈尔滨理工大学学报,2019,(02):33.[doi:10.15938/j.jhust.2019.02.006]
 SUN Quan ying,CAO Fei fei,MA Ming ming,et al. Simulation Analysis and Optimization of the Shearing Type of Quadrangular Rotor[J].哈尔滨理工大学学报,2019,(02):33.[doi:10.15938/j.jhust.2019.02.006]
[4]张元,范华平,蒋小寒,等. 整流罩快速对接设计及其结构特性分析[J].哈尔滨理工大学学报,2019,(02):53.[doi:10.15938/j.jhust.2019.02.009]
 ZHANG Yuan,FAN Hua ping,JIANG Xiao han,et al. Design and Structural Characteristics Analysis of Fast Docking for the Fairing[J].哈尔滨理工大学学报,2019,(02):53.[doi:10.15938/j.jhust.2019.02.009]

备注/Memo

备注/Memo:
 收稿日期:2017-04-13
基金项目:黑龙江省自然科学基金(E201020)
作者简介:马明骁(1991—),男,硕士研究生
通信作者:
赵新通(1971—),男,博士, 教授,硕士研究生导师,E-mail:5681604@qq.com.
更新日期/Last Update: 2019-05-17