[1]杨小璠,黄宗明,李友生,等. 新型铣刀铣削碳纤维复合材料毛刺抑制机理[J].哈尔滨理工大学学报,2018,(05):30-34.[doi:1015938/jjhust201805006]
 YANG Xiao fan,HUANG Zong ming,LI You sheng,et al. The Mechanism of Burr Inhibition for Milling CFRP with New Type of Milling Tools[J].哈尔滨理工大学学报,2018,(05):30-34.[doi:1015938/jjhust201805006]
点击复制

 新型铣刀铣削碳纤维复合材料毛刺抑制机理()
分享到:

《哈尔滨理工大学学报》[ISSN:1007-2683/CN:23-1404/N]

卷:
期数:
2018年05期
页码:
30-34
栏目:
机械动力工程
出版日期:
2018-10-25

文章信息/Info

Title:
 The Mechanism of Burr Inhibition for Milling CFRP with New Type of Milling Tools
作者:
 杨小璠1黄宗明2李友生2李凌祥2沈志煌1
 (1.集美大学 机械与能源工程学院,福建 厦门 361021;2.厦门金鹭特种合金有限公司,福建 厦门 361100)
Author(s):
 YANG Xiaofan1HUANG Zongming2LI Yousheng2LI Lingxiang2SHEN Zhihuang1
 (1.School of Mechanical and Energy Engineering,Jimei University,Xiamen 361021,China;
2.Xiamen Golden Egret Special Alloy Co, Ltd, Xiamen 361006, China)
关键词:
 关键词:碳纤维复合材料交错刃立铣刀菱齿型立铣刀加工表面质量刀具磨损
Keywords:
 Keywords:carbon fiberreinforced plastics(CFRP)crossflute routerfinecrossnick routermachining surface qualitytool wear
分类号:
TG501
DOI:
1015938/jjhust201805006
文献标志码:
A
摘要:
 摘要:针对碳纤维复合材料铣削时易产生毛刺等加工缺陷的问题,分析了新型铣刀抑制毛刺产生的切削机理。选用未涂层的普通立铣刀、交错刃立铣刀、菱齿型立铣刀以及金刚石涂层的菱齿型立铣刀,在相同切削条件下对碳纤维复合材料进行侧铣试验。通过对加工表面质量、刀具磨损以及刀具寿命的对比分析得出:交错刃立铣刀和菱齿型立铣刀能有效抑制工件表面毛刺的产生;由于菱齿型立铣刀参与切削的刃数比交错刃立铣刀多,抑制铣削毛刺产生的能力最好;金刚石涂层菱齿型立铣刀的使用寿命最长,其后刀面磨损缓慢,适合碳纤维复合材料的铣削加工。
Abstract:
 Abstract:Concerning the machining defects such as burrs while milling Carbon Fiberreinforced Plastics(CFRP) with ordinary cutters,the cutting mechanism of the newtype end mills for suppressing the burrs generation in milling CFRP was analyzed Uncoated ordinary end mill, crossflute router, finecrossnick router and diamond coated finecrossnick router are selected to process the CFRP under the same cutting conditions The comparative analysis results of the surface quality, tool wear and tool life show that the crossflute router and finecrossnick router can effectively suppress the burrs occurrence of the workpiece surface  The number of cutting edges the finecrossnick router involved are more than the crossflute router, so its ability of suppressing burrs is best And the effect of suppressing burrs of righthand end mill is worst The diamond coated finecrossnick router has the longest tool life and is most suitable for milling CFRP



参考文献/References:

[1]苏飞碳纤维增强复合材料切削加工技术及其应用研究[D].南京:南京理工大学,2015:17-23.
[2]陈涛,苗光,李素燕 碳纤维复合材料切削加工技术研究进展[J].哈尔滨理工大学学报, 2016,21(2):71-76
[3]何耿煌,李凌祥,程程,等.工件材料可切削性对可转位硬质合金刀具加工经济性影响规律研究[J].金刚石与磨料磨具工程,2017,37(6):62-69.
[4]陈燕,葛恩德,傅玉灿,等碳纤维增强树脂基复合材料制孔技术研究现状与展望[J].复合材料学报,2015,32(2):301-316
[5]何耿煌,李凌祥,邹伶俐,等.亚微观倒棱切削刃对硬质合金刀片切削性能的影响特性研究[J].金刚石与磨料磨具工程,2017,37(3):46-54.
[6]KARPAT Y, DEGER B, BAHTIYAR O Experimental Evaluation of Polycrystalline Diamond Tool Geometries While Drilling Carbon Fiberreinforced Plastics[J]. International Journal of Advanced Manufacuring Technology, 2014, 71(8):1295-1307
[7]邓福铭,陈立,邓雯丽,等微/纳米金刚石复合涂层刀具的制备及切削试验[J]. 人工晶体学报,2015, 44(10):2728-2733
[8]SCHULZE V, BECKE C,PABST R Specific Machining Forces and Resultant Force Vectors for Machining of Reinforced Plastics [J].CIRP AnnalsManufacturing Technology, 2011,60(1):69-72
[9]HINTZE W,HARTMANN D,CHRISTOPH S Oceurrenee and Propagation of Delamination During the Machining of Carbon Fibre Reilfforced Plastics( CFRPs ) An Experimental Study[J]. Composites Science and Technology,2011,71: 1719 -1726
[10]林有希,禹杰,林华 碳纤维/树脂基复合材料高速铣削的刀具磨损机理[J]. 中国表面工程,2016,29(5): 138-145
[11]周井文,陈燕,傅玉灿,等进给速度对不同纤维方向CFRP铣削表面形貌的影响[J]. 复合材料学报,2015, 32(2): 370-377. 
[12]钱宝伟,刘巍,贾振元,等双顶角钻头钻削CFRP复合材料的刀具磨损机制[J]. 复合材料学报,2017, 34(4): 749-757 
[13]徐银超,陈浩,曾滔,等切削参数对碳纤维复合材料制孔质量的影响[J]. 硬质合金,2016,33(5):336-341
[14]杨小璠,鄢国洪,李友生,等新型交错刃硬质合金立铣刀铣削碳纤维复合材料的研究[J]. 稀有金属与硬质合金,2015, 43(4):67-71
[15]鄢国洪不同涂层的硬质合金菱齿立铣刀铣削CFRP的性能研究[J]. 工具技术,2015, 49(10):32-35

相似文献/References:

[1]孙永全,郭建英,陈洪科,等.AMSAA模型可靠性增长预测方法的改进[J].哈尔滨理工大学学报,2010,(05):49.
 SUN Yong-quan,GUO Jian-ying,CHEN Hong-ke,et al.An Improved Reliability Growth Prediction Algorithm Based on AMSAA Model[J].哈尔滨理工大学学报,2010,(05):49.
[2]滕志军,李晓霞,郑权龙,等.矿井巷道的MIMO信道几何模型及其信道容量分析[J].哈尔滨理工大学学报,2012,(02):14.
 TENG Zhi-jun,LI Xiao-xia,ZHENG Quan-long.Geometric Model for Mine MIMO Channels and Its Capacity Analysis[J].哈尔滨理工大学学报,2012,(05):14.
[3]李艳苹,张礼勇.新训练序列下的改进OFDM符号定时算法[J].哈尔滨理工大学学报,2012,(02):19.
 LI Yan-ping,ZHANG Li-yong.An Improved Algorithm of OFDM Symbol Timing Based on A New Training Sequence[J].哈尔滨理工大学学报,2012,(05):19.
[4]赵彦玲,车春雨,铉佳平,等.钢球全表面螺旋线展开机构运动特性分析[J].哈尔滨理工大学学报,2013,(01):37.
 ZHAO Yan-ling,CHE Chun-yu,XUAN Jia-ping,et al.[J].哈尔滨理工大学学报,2013,(05):37.
[5]李冬梅,卢旸,刘伟华,等.一类具有连续接种的自治SEIR传染病模型[J].哈尔滨理工大学学报,2013,(01):73.
 LI Dong-mei,LU Yang,LIU Wei-hua.[J].哈尔滨理工大学学报,2013,(05):73.
[6]华秀英,刘文德.奇Hamiltonian李超代数偶部的非负Z-齐次导子空间[J].哈尔滨理工大学学报,2013,(01):76.
 HUA Xiu-ying,LIU Wen-de.[J].哈尔滨理工大学学报,2013,(05):76.
[7]桂存兵,刘洋,何业军,等.基于LCC谐振电路阻抗匹配的光伏发电最大功率点跟踪[J].哈尔滨理工大学学报,2013,(01):90.
 GUI Cun-bing,LIU Yong,HE Ye-jun.[J].哈尔滨理工大学学报,2013,(05):90.
[8]翁凌,闫利文,夏乾善,等.PI/TiC@Al2O3复合薄膜的制备及其电性能研究[J].哈尔滨理工大学学报,2013,(02):25.
 WENG Ling,YAN Li-wen,XIA Qian-shan.[J].哈尔滨理工大学学报,2013,(05):25.
[9]姜彬,林爱琴,王松涛,等.高速铣刀安全性设计理论与方法[J].哈尔滨理工大学学报,2013,(02):63.
 JIANG Bin,LIN Ai-qin,WANG Song-tao,et al.[J].哈尔滨理工大学学报,2013,(05):63.
[10]李星纬,李晓东,张颖彧,等.EVOH 磺酸锂电池隔膜的制备及微观形貌[J].哈尔滨理工大学学报,2013,(05):18.
 LI Xing- wei,LI Xiao- dong,ZHANG Ying- yu,et al.The Preparation and Microcosmic Morphology oEVOH- SO Li Lithium Ion Battery Septum[J].哈尔滨理工大学学报,2013,(05):18.

备注/Memo

备注/Memo:
 基金项目:福建省自然科学基金(2016J01246)
更新日期/Last Update: 2018-11-14