[1]徐雳,刘冰,吴石,等. 双面研磨/抛光机磨削轨迹研究[J].哈尔滨理工大学学报,2018,(04):37-42.[doi:10.15938/j.jhust.2018.04.008]
 XU Li,LIU Bing,WU Shi,et al. DoubleSided Lapping/Polishing Machine Grinding Trajectory Studies[J].哈尔滨理工大学学报,2018,(04):37-42.[doi:10.15938/j.jhust.2018.04.008]
点击复制

 双面研磨/抛光机磨削轨迹研究()
分享到:

《哈尔滨理工大学学报》[ISSN:1007-2683/CN:23-1404/N]

卷:
期数:
2018年04期
页码:
37-42
栏目:
机械动力工程
出版日期:
2018-08-25

文章信息/Info

Title:
 DoubleSided Lapping/Polishing Machine Grinding Trajectory Studies
作者:
 徐雳刘冰吴石段昊阳董瑞
 哈尔滨理工大学 机械动力工程学院,黑龙江 哈尔滨 150080
Author(s):
 XU LiLIU BingWU ShiDUAN HaoyangDONG Rui
 School of Mechanical and Power Engineering, Harbin University of Science and Technology, Harbin 150080, China
关键词:
关键词:研磨抛光磨削轨迹仿真分析工艺参数
Keywords:
 Keywords:grinding polishing grinding trajectory simulation analysis process parameters
分类号:
TM311; TK121
DOI:
10.15938/j.jhust.2018.04.008
文献标志码:
A
摘要:
摘要:通过分析双面研磨/抛光加工机理,对工件进行受力分析,并建立工件的运动原理加工中抛光盘相对工件运动轨迹模型,进行抛光盘相对于工件运动轨迹仿真分析,得到抛光盘不同位置点对工件相对运动轨迹,最终得出对磨削轨迹均匀性的影响选取磨削轨迹致密性、均匀性最好的一组工艺参数。并进行了正交实验验证分析,从中选取一组组合优化的工艺参数,并结合理论分析的模型验证了参数的可行性,通过实验验证了理论建模的正确性。采用的分析方法和得出的结论,不仅对双面研磨/抛光机实际加工、运行及工艺参数的选择具有实用价值,也为今后的研究工作提供了理论基础。
Abstract:
 Abstract:In this paper, by analyzing the doublesided lapping/polishing processing mechanism, the stress analysis was carried out on the workpiece, and we establish the pads relatively workpiece in machining the movement principle of trajectory model, pads, relative to the workpiece trajectory simulation analysis and get pads different points on the workpiece relative motion trajectory. Finally it is concluded that the grinding trajectory density uniformity effect is realized through the selection of grinding, the best uniformity of a set of process parametersFort he orthogonal experiment analysis, we choose the set of optimization of process parameters, combining with theoretical analysis model to verify the feasibility of parameters, the correctness of the theoretical model is verified by experimentThis article adopts the analysis method The doublesided lapping/polishing machine processing, the actual operation and the selection of technological parameters has practical value, and provides a theoretical basis for the future research work

参考文献/References:

 [1]YUAN J L, LOUB F Y, WANG Z W, et al. Research on Ultraprecision Machining Technology for KTP[J]. Materials Science Forrum, 2004(471/472): 473-476.
[2]赵珉乾. 高精度双面研抛机动态特性研究及工艺参数优化[D].秦皇岛:燕山大学,2014.
[3]KIM HyukMin, MANIVANNAN R, MOON DeogJu,et al. Evaluation of Double Sided Lapping Using a Fixed Abrasive Pad for Sapphire Substrates[J]. Wear, 2013 (1/2).34:183-187.
[4]陆晓春. 化学机械抛光试验及其材料去除机理的研究[D]. 无锡:江南大学,2014.
[5]吴明明. 单晶硅片的超精密加工技术研究[D]. 杭州:浙江工业大学, 2005.
[6]JIANG Guo, SUZUKI Hirofumi, MORITA Shinya. A Realtime Polishing Force Control System for UltrapRecision Finishing of Microoptics[J]. Precision Engineering, 2013(37):787-792.
[7]LI Liang, HE Qing, ZHENG Mian, et al. Contribution of Ultrasonic Traveling Wave to Chemicalmechanical Polishing[J]. Ultrasonics. 2015(56):530-538.
[8]王永涛. 双面抛光去除非均匀性研究[D]. 北京有色金属研究总院, 2012.
[9]李强.单晶金刚石的研磨与化学机械抛光工艺[D]. 大连:大连理工大学, 2013.
[10]KG*2〗WILKIE D. Orthogonal Comparisons for Fourier Analysis within Mixed Level Factorial Experiments[J]. Journal of Applied Statistics. 1986, 13(1):57-66.
[11]KG*2〗刘瑞江,张业旺,闻崇炜,等. 正交试验设计和分析方法研究[J]. 实验技术与管理, 2010(9):52-55.
[12]KG*2〗郭萍. 三因素方差分析的原理及应用[J]. 沈阳大学学报(自然科学版), 2015(1):40.

备注/Memo

备注/Memo:
 基金项目:国家自然科学基金(51675146);黑龙江省自然科学基金(E2018048)
更新日期/Last Update: 2018-10-25