[1]解宝成,崔贺新,张元,等. 微细电火花微孔加工技术的发展现状[J].哈尔滨理工大学学报,2018,(04):25-30.[doi:10.15938/j.jhust.2018.04.005]
 XIE Bao cheng,CUI He xin,ZHANG Yuan,et al. Current Research of Micro Electrical Discharge Machining of Microhole[J].哈尔滨理工大学学报,2018,(04):25-30.[doi:10.15938/j.jhust.2018.04.005]
点击复制

 微细电火花微孔加工技术的发展现状
()
分享到:

《哈尔滨理工大学学报》[ISSN:1007-2683/CN:23-1404/N]

卷:
期数:
2018年04期
页码:
25-30
栏目:
机械动力工程
出版日期:
2018-08-25

文章信息/Info

Title:
 Current Research of Micro Electrical Discharge Machining of Microhole
作者:
 解宝成崔贺新张元刘献礼
 哈尔滨理工大学 机械动力工程学院,黑龙江 哈尔滨 150080
Author(s):
 XIE BaochengCUI HexinZHANG YuanLIU Xianli
 School of Mechanical and Power Engineering, Harbin University of Science and Technology, Harbin 150080, China
关键词:
关键词:微细电火花加工微孔基础理论加工工艺
Keywords:
 Keywords:microelectrical discharge machining microhole basic theory processing technology
分类号:
TG661
DOI:
10.15938/j.jhust.2018.04.005
文献标志码:
A
摘要:
 摘要:微细电火花微孔加工技术是电火花加工领域的一个重要发展方向。在分析大量文献的基础上,系统地总结了微细电火花加工微孔技术的基础理论和加工工艺研究进展及应用现状,主要介绍了微细电火花加工的蚀除机理、蚀除产物排出机理、微细工具电极的在线制作、加工工艺参数的选择与辅助其他加工方法的复合加工工艺,分析了当前微细电火花微孔加工技术存在的问题,并展望其发展趋势。
Abstract:
 Abstract:Microelectrical discharge machining of microhole is an important developing direction of electrical discharge machining at present In this paper, much literature about microelectrical discharge machining of microhole has been summarized and analyzed in the theoretical and experimental aspects The basic theory and processing technology of the microelectrical discharge machining are introduced,including material removal mechanism and debris movement mechanism, onmachine production of micro electrodes, selection of machining parameters and combined machining technology Furthermore, the main problems and the development tendency in the future also have been evaluated and summarized

参考文献/References:

 


[1]陈飞, 王宝瑞, 施威,等 微细电火花加工技术研究现状概述[J]. 电加工与模具, 2015(1):6-10
[2]中国机械工程学会特种加工分会 特种加工技术路线图著[M]. 北京:中国科学技术出版社, 2016
[3]刘媛, 曹凤国, 桂小波,等 电火花加工放电爆炸力对材料蚀除机理的研究[J]. 电加工与模具, 2008(5):19-25
[4]李健, 刘志东, 邱明波,等 单晶硅放电蚀除机理研究及有限元分析[J]. 中国机械工程, 2010(7):847-851
[5]SINGH A, GHOSH A Estimating the Energy Repartition in Micro Electrical Discharge Machining[J]. Precision Engineering, 2016(43):479-485
[6]DIBITONTO D D, EUBANK P T, PATAL M R, et al Theoretical Models of the Electrical Discharge Machining Process I A Simple Cathode Erosion Model[J]. Journal of Applied Physics, 1989, 66(9):4095-4103
[7]ZHANG Y, WILT K, KANG X, et al The Experimental Investigation of Electrostatic Fieldinduced Electrolyte Jet (EJet) Microelectrical Machining Mechanism[J].Intenational Journal of Advanced Manufacturing Technology, 2016:1-10
[8]宋夕超, 张建华, 董春杰 基于ABAQUS的煤油介质中电火花表面强化工艺参数的研究[J]. 电加工与模具, 2011(1):6-10
[9]KURIACHEN B, MATHEW J Spark Radius Modeling of Resistancecapacitance Pulse Discharge in Microelectric Discharge Machining of Ti6Al4V: an Experimental Study[J]. The International Journal of Advanced Manufacturing Technology, 2016, 85(9):1-11
[10]KG*2〗MUJUMDAR S S, CURRELI D, KAPOOR S G, et al Modeling of MeltPool Formation and Material Removal in MicroElectrodischarge Machining[J]. Journal of Manufacturing Science & Engineering, 2014, 137(3):031007
[11]KG*2〗ESCOBAR A M, LANGE D F D, CASTILLO H I M Comparative Analysis and Evaluation of Thermal Models of Electro Discharge Machining[J]. International Journal of Advanced Manufacturing Technology, 2016:1-12
[12]KG*2〗YEO S H,KURNIA W, TAN P C Critical Assessment and Numerical Comparison of Electrothermal Models in EDM[J] Journal of Materials Processing Tech, 2008, 203(1):241-251
[13]KG*2〗曹一龙, 曹明让, 郝岳峰,等 螺旋电极电火花小孔加工排屑仿真和试验[J]. 机械设计与研究, 2015(1):89-92
[14]KG*2〗张俊清 高速流场下电火花小孔加工试验及应用研究[D]. 南京:南京航空航天大学, 2014
[15]KG*2〗王海蛟, 孔德政, 张敏,等 低频振动辅助电火花铣削加工间隙流场研究[J]. 电加工与模具, 2015(2):13-16
[16]KG*2〗EKMEKCI B, YASAR H, EKMEKCI N A Discharge Separation Model for Powder Mixed Electrical Discharge Machining[J]. Journal of Manufacturing Science & Engineering, 2016, 138(8)
[17]KG*2〗WANG J, HAN F Simulation Model of Debris and Bubble Movement in Electrode Jump of Electrical Discharge Machining[J]. International Journal of Advanced Manufacturing Technology, 2014, 74(5/8):591-598
[18]KG*2〗PARTHIBAN M, KRISHNARAJ V, SINDHUMATHI R, et al Investigation on Manufacturing of Microtools Made of Tungsten Carbide Using Wire Electric Discharge Grinding (WEDG)[J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2017:1-10
[19]KG*2〗HOURMAND M, SARHAN A A D, YUSOF N M Proposing New Fabrication and Measurement Techniques of Microelectrodes with High Aspect Ratio for Micro EDM Drilling of Tungsten Carbide (WC) Using EDM Machine[J]. Measurement, 2016(97):64-78
[20]KG*2〗ZHANG L, TONG H, LI Y Precision Machining of Micro Tool Electrodes in Micro EDM for Drilling Array Micro Holes[J]. Precision Engineering, 2015, 39:100-106
[21]KG*2〗舒霞云, 张鸿海, 张丰,等 用于微喷嘴制作的高效微电火花加工技术[J]. 华中科技大学学报(自然科学版), 2010(2):48-51
[22]KG*2〗WANG J Y, DONG Y S Developing a Process Chain with WEDG Technology and Pulse ECM to Fabricate Ultra Micro Pins[J]. Procedia CIRP, 2016,(42):815-818
[23]KG*2〗王燕青 旋转电极蠕动补偿主轴及微细电极电火花加工技术的研究[D]. 哈尔滨:哈尔滨工业大学, 2014
[24]KG*2〗GARG S K, MANNA A, JAIN A Experimental Investigation of Spark Gap and Material Removal Rate of Al/ZrO 2(P) MMC Machined with Wire EDM[J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2016, 38(2):481-491
[25]KG*2〗NIRALA C K, SAHA P Evaluation of μEDMdrilling and μEDMdressing Performances Based on Online Monitoring of Discharge Gap Conditions[J]. The International Journal of Advanced Manufacturing Technology, 2016(9):1-18
[26]KG*2〗NATARAJAN N, SURESH P Experimental Investigations on Themicrohole Machining of 304 Stainless Steel by MicroEDM Process Using RCtype Pulse Generator[J]. The International Journal of Advanced Manufacturing Technology, 2015, 77(9):1741-1750
[27]KG*2〗D’URSO G, RAVASIO C MaterialTechnology Index to Evaluate MicroEDM Drilling Process[J]. Journal of Manufacturing Processes, 2017(26):13-21
[28]KG*2〗TAMANG S K, NATARAJAN N, CHANDRASEKARAN M Optimization of EDM Process in Machining Micro Holes for Improvement of Hole Quality[J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2016:1-11
[29]KG*2〗车江涛 水平超声振动电火花复合加工装置及试验研究[D]. 中北大学, 2014
[30]KG*2〗LEE P A, KIM Y, BO H K Effect of Low Frequency Vibration on Micro EDM Drilling[J]. International Journal of Precision Engineering and Manufacturing, 2015, 16(13):2617-2622
[31]KG*2〗DAS A K, KUMAR P, SETHI A, et al Influence of Process Parameters on the Surface Integrity of Microholes of SS304 Obtained by MicroEDM[J]. The Brazilian Society of Mechanical Sciences and Engineering, 2016,38(7):2029-2037
[32]KG*2〗孙强, 李小朋, 展宝成 混粉电火花加工中的多火花放电现象研究[C]// 第16届全国特征加工学术会议, 2015:39-44
[33]KG*2〗LIEW P J, YAN J, KURIYAGAWA T Fabrication of Deep Microholes in Reactionbonded SiC by Ultrasonic Cavitation Assisted MicroEDM[J]. International Journal of Machine Tools and Manufacture, 2014, 76: 13-20
[34]KG*2〗REDDY VV, KUMAR A, VALLI P M, et al Influence of Surfactant and Graphite Powder Concentration on Electrical Discharge Machining of PH174 Stainless Steel[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2015, 37(2):641-655
[35]KG*2〗KUMAR H Development of Mirror Like Surface Characteristics Usingnano Powder Mixed Electric Discharge Machining (NPMEDM)[J]. The International Journal of Advanced Manufacturing Technology, 2015, 76(1):105-113
[36]KG*2〗PRIHANDANA G S, MAHARDIKA M, HAMDI M, et al Effect of Micropowder Suspension and Ultrasonic Vibration of Dielectric Fluid in MicroEDM Processes—Taguchi Approach[J]. International Journal of Machine Tools & Manufacture, 2009, 49(12/13):1035-1041
[37]KG*2〗MOLINETTI A, AMORIM F L, SOARES P C, et al Surface Modification of AISI H13 Tool Steel with Silicon or Manganese Powders Mixed to the Dielectric in Electrical Discharge Machining Process[J]. The International Journal of Advanced Manufacturing Technology, 2016, 83(5):1057-1068
[38]KG*2〗YAN Z, XU Z, YUN Z, et al Machining of a Filmcooling Hole in a Singlecrystalsuperalloy by Highspeed Electrochemical Discharge Drilling[J]. Chinese Journal of Aeronautics, 2016, 29(2):560-570
[39]KG*2〗ZHANG Y, XU Z, ZHU D, et al Tube Electrode Highspeed Electrochemical Discharge Drilling Using Lowconductivity Salt Solution[J]. International Journal of Machine Tools & Manufacture, 2015, 92:10-18

 



备注/Memo

备注/Memo:
 基金项目:国家自然科学基金(51605123);黑龙江省自然科学基金(E2016044)
更新日期/Last Update: 2018-10-25