[1]姜彬,王森,李哲,等. 车削大螺距螺纹工艺可靠性评判方法[J].哈尔滨理工大学学报,2019,(01):1-7.[doi:10.15938/j.jhust.2019.01.001]
 JIANG Bin,WANG Sen,LI Zhe,et al. Process Reliability Evaluation Method of Turning Large Pitch External Thread[J].哈尔滨理工大学学报,2019,(01):1-7.[doi:10.15938/j.jhust.2019.01.001]
点击复制

 车削大螺距螺纹工艺可靠性评判方法()
分享到:

《哈尔滨理工大学学报》[ISSN:1007-2683/CN:23-1404/N]

卷:
期数:
2019年01期
页码:
1-7
栏目:
机械动力工程
出版日期:
2019-08-06

文章信息/Info

Title:
 Process Reliability Evaluation Method of Turning Large Pitch External Thread

作者:
 姜彬1王森1李哲1张为1吴培军2
(1哈尔滨理工大学 高效切削及刀具国家地方联合工程实验室,黑龙江 哈尔滨 150080;
2齐齐哈尔二机床(集团)有限责任公司,黑龙江 齐齐哈尔 161000)
Author(s):
 JIANG Bin1WANG Sen1LI Zhe1ZHANG Wei1WU Peijun2
 (1.Key Lab of National and Local United Engineering for HighEfficiency Cutting and Tools, 
Harbin University of Science and Technology, Harbin 150080, China; 
2.Qiqihar No.2 Machine Tool (Group) Co., Ltd. Qiqihar 161000, China)
关键词:
 关键词:大螺距外螺纹加工误差灰色关联工艺可靠性
Keywords:
 Keywords:large pitch external thread machining error grey correlation process reliability
分类号:
TG714
DOI:
10.15938/j.jhust.2019.01.001
文献标志码:
A
摘要:
 摘要:大螺距螺杆左右螺纹面加工误差沿轴向的分布对压力机滑块的定位与重复定位精度有重要影响,车削螺纹工艺应具有高可靠性。已有的利用误差最大值评判加工精度的方法,忽略了加工误差沿轴向的分布特性,无法揭示工艺的可靠性。为此,采用相同工艺方案,进行两次车削螺距16mm外螺纹试验,构建中径误差和左右螺纹面的大小径、牙型半角、螺距误差分布行为序列,采用灰色关联分析方法,利用加工误差分布行为序列的相似性评判大螺距外螺纹工艺可靠性,并进行实验验证。结果表明,采用该方法可有效识别和评判车削大螺距螺纹工艺可靠性。
Abstract:
 Abstract:There is a great influence of machining error distribution of large pitch screw’s left and right thread surface along the axial direction on positioning and repeat positioning accuracy of press slide Thread cutting process should have high reliability The method through judging the machining accuracy by maximum error ignores the distribution characteristics of the machining error along the axial direction and cannot reveal the reliability of the process For all this, there are two tests of turning external thread with pitch 16mm conducted in the same process Through the experiments, distributions of big diameter error, small diameter error,half of thread angle error,pitch and pitch diameter error of left and right thread surfaces are structured The process reliability can be judged by the similarity between the machining error sequences through the grey correlation analysis method Then verification of process reliability evaluation method is verified by experiment Finally, the results show that the method is applicable to recognize and evaluate the stability, repeatability of thread surface machining error and consistence of left and right thread surface machining error

参考文献/References:

[1]高峰,郭为忠,宋清玉,等 重型制造装备国内外研究现状[J]. 机械工程学报,2010,19 : 92
[2]卢蔚民,孙友松,卢怀亮 重型摩擦压力机的再制造方案[J]. 锻压技术, 2013,05 : 132
[3]LI K,JIANG L,CHEN M Experimental study on the influence of cutting parameters on thread precision of external thread turning[J]. Materials Science Forum,2014,770 : 7
[4]PIERRE S,FLORESTAN M,JEAN G Experimental study of forming and tightening processes with thread forming screws[J]. Journal of Materials Processing Tech,2011,2124
[5]张义民机械可靠性设计的内涵与递进[J]. 机械工程学报,2010,14 : 167
[6]张义民,孙志礼 机械产品的可靠性大纲[J]. 机械工程学报,2014,14 : 14
[7]胡占齐,解亚飞,刘金超 超重型数控镗铣床精度可靠性研究[J]. 哈尔滨工程大学学报,2011,32(12) : 1599
[8]邓超,吴军,毛宽民,等 面向大型数控机床的工艺可靠性评估[J].计算机集成制造系统, 2010,10 : 2250
[9]张根保,葛红玉,刘佳,等 可靠性驱动的装配过程建模及预测方法[J]. 计算机集成制造系统,2012,02 : 349
[10]匡芬,戴伟,王健,等 基于质量特性演化的工艺可靠性评估[J]. 计算机集成制造系统,2015,08 : 2124
[11]付桂翠,上官云,史兴宽,等基于产品可靠性的工艺系统可靠性模型[J].北京航空航天大学学报,2009,01:9
[12]刘勇,刘思峰,JEFFREY F 一种新的灰色绝对关联度模型及其应用[J]. 中国管理科学,2012,20(5):173

相似文献/References:

[1]孙永全,郭建英,陈洪科,等.AMSAA模型可靠性增长预测方法的改进[J].哈尔滨理工大学学报,2010,(05):49.
 SUN Yong-quan,GUO Jian-ying,CHEN Hong-ke,et al.An Improved Reliability Growth Prediction Algorithm Based on AMSAA Model[J].哈尔滨理工大学学报,2010,(01):49.
[2]滕志军,李晓霞,郑权龙,等.矿井巷道的MIMO信道几何模型及其信道容量分析[J].哈尔滨理工大学学报,2012,(02):14.
 TENG Zhi-jun,LI Xiao-xia,ZHENG Quan-long.Geometric Model for Mine MIMO Channels and Its Capacity Analysis[J].哈尔滨理工大学学报,2012,(01):14.
[3]李艳苹,张礼勇.新训练序列下的改进OFDM符号定时算法[J].哈尔滨理工大学学报,2012,(02):19.
 LI Yan-ping,ZHANG Li-yong.An Improved Algorithm of OFDM Symbol Timing Based on A New Training Sequence[J].哈尔滨理工大学学报,2012,(01):19.
[4]赵彦玲,车春雨,铉佳平,等.钢球全表面螺旋线展开机构运动特性分析[J].哈尔滨理工大学学报,2013,(01):37.
 ZHAO Yan-ling,CHE Chun-yu,XUAN Jia-ping,et al.[J].哈尔滨理工大学学报,2013,(01):37.
[5]李冬梅,卢旸,刘伟华,等.一类具有连续接种的自治SEIR传染病模型[J].哈尔滨理工大学学报,2013,(01):73.
 LI Dong-mei,LU Yang,LIU Wei-hua.[J].哈尔滨理工大学学报,2013,(01):73.
[6]华秀英,刘文德.奇Hamiltonian李超代数偶部的非负Z-齐次导子空间[J].哈尔滨理工大学学报,2013,(01):76.
 HUA Xiu-ying,LIU Wen-de.[J].哈尔滨理工大学学报,2013,(01):76.
[7]桂存兵,刘洋,何业军,等.基于LCC谐振电路阻抗匹配的光伏发电最大功率点跟踪[J].哈尔滨理工大学学报,2013,(01):90.
 GUI Cun-bing,LIU Yong,HE Ye-jun.[J].哈尔滨理工大学学报,2013,(01):90.
[8]翁凌,闫利文,夏乾善,等.PI/TiC@Al2O3复合薄膜的制备及其电性能研究[J].哈尔滨理工大学学报,2013,(02):25.
 WENG Ling,YAN Li-wen,XIA Qian-shan.[J].哈尔滨理工大学学报,2013,(01):25.
[9]姜彬,林爱琴,王松涛,等.高速铣刀安全性设计理论与方法[J].哈尔滨理工大学学报,2013,(02):63.
 JIANG Bin,LIN Ai-qin,WANG Song-tao,et al.[J].哈尔滨理工大学学报,2013,(01):63.
[10]李星纬,李晓东,张颖彧,等.EVOH 磺酸锂电池隔膜的制备及微观形貌[J].哈尔滨理工大学学报,2013,(05):18.
 LI Xing- wei,LI Xiao- dong,ZHANG Ying- yu,et al.The Preparation and Microcosmic Morphology oEVOH- SO Li Lithium Ion Battery Septum[J].哈尔滨理工大学学报,2013,(01):18.

备注/Memo

备注/Memo:
 基金项目:国家自然科学基金(51575148);黑龙江省应用技术研究与开发计划项目(GC13A404)
更新日期/Last Update: 2019-03-26