[1]蔡春波,张华军,张义顺,等.基于PLC视觉传感焊缝自动跟踪执行系统的实现[J].哈尔滨理工大学学报,2009,(05):16-19.
 CAI Chun-bo,ZHANG Hua-jun,ZHANG Yi-shun,et al.Realization of Welding Seam Auto-tracking Executive System Base on PLC and Visual Sensor[J].哈尔滨理工大学学报,2009,(05):16-19.
点击复制

基于PLC视觉传感焊缝自动跟踪执行系统的实现()
分享到:

《哈尔滨理工大学学报》[ISSN:1007-2683/CN:23-1404/N]

卷:
期数:
2009年05期
页码:
16-19
栏目:
材料科学与工程
出版日期:
2009-10-25

文章信息/Info

Title:
Realization of Welding Seam Auto-tracking Executive System Base on PLC and Visual Sensor
作者:
蔡春波; 张华军; 张义顺; 石端虎;
哈尔滨理工大学材料科学与工程学院; 沈阳工业大学材料科学与工程学院; 徐州工程学院机电工程学院;
Author(s):
CAI Chun-bo1; ZHANG Hua-jun1; ZHANG Yi-shun2; SHI Duan-hu3
1.School of Material Science and Engineering; Harbin University of Science and Technology; Harbin 150040; China; 2.College of Material Science and Engineering; Shenyang University Technology; Shenyang 11002; 3.School of Electromechanical Engineering; Xuzhou Institute of Technology; Xuzhou 221008; China
关键词:
焊缝跟踪 可编程控制器 串口通讯 PID控制
Keywords:
welding seam auto-tracking PLC serial port communication PID controlling
分类号:
TG409
文献标志码:
A
摘要:
焊缝自动跟踪技术的研究对保证焊接效率和质量具有重要意义,本文建立了基于CCD视觉传感器和可编程控制器(PLC)焊缝自动跟踪执行系统,根据焊缝跟踪系统的实现功能设计了执行机械装置,根据控制点数要求设计了PLC控制电路和与横纵向电机的接口电路,并介绍了PLC与上位机的通讯程序,采用适当的PID参数,最终满足了焊缝自动跟踪的要求.
Abstract:
Investigation on seam auto-tracking is very significant to improve the welding quality and efficiency.In this study,welding seam automatic tracking executive system is developed based on CCD visual sensor and programmable logical controller(PLC).Executive mechanism of auto-tracking system is developed according to the function of realization.Moreover the electric circuit of PLC and longitudinal and transverse motors are designed also.This paper introduces the communicate programs between PLC and the upper c...

相似文献/References:

[1]孙全颖,王立美,胡守鹏.深度测量系统设计[J].哈尔滨理工大学学报,2013,(05):26.
 SUN Quan- ying,WANG Li- mei,HU Shou- peng.Designation of Depth Measurement System[J].哈尔滨理工大学学报,2013,(05):26.

备注/Memo

备注/Memo:
哈尔滨市创新人才专项基金(RC2006QN017026);; 哈尔滨市青年基金项目(2005AFQXJ032)
更新日期/Last Update: 2009-12-16