[1]秦柏,邵俊鹏,张艳芹,等.环形橡胶径向刚度特性仿真分析[J].哈尔滨理工大学学报,2009,(03):51-55.
 QIN Bai,SHAO Jun-peng,ZHANG Yan-qin,et al.Radial Stiffness Characteristics Simulation Analysis of Annular Rubber[J].哈尔滨理工大学学报,2009,(03):51-55.
点击复制

环形橡胶径向刚度特性仿真分析()
分享到:

《哈尔滨理工大学学报》[ISSN:1007-2683/CN:23-1404/N]

卷:
期数:
2009年03期
页码:
51-55
栏目:
机械动力工程
出版日期:
2009-06-25

文章信息/Info

Title:
Radial Stiffness Characteristics Simulation Analysis of Annular Rubber
作者:
秦柏; 邵俊鹏; 张艳芹; 李剑英;
哈尔滨理工大学机械动力工程学院;
Author(s):
QIN Bai; SHAO Jun-peng; ZHANG Yan-qin; LI Jian-ying
School of Mechanical and Power Engineering; Harbin University of Science and Technology; Harbin 150080; China
关键词:
环形橡胶 径向刚度 有限元分析 特性分析
Keywords:
annular rubber radial stiffness finite element analysis optimization analysis
分类号:
TB535.1
文献标志码:
A
摘要:
利用ANSYS软件建立了环形橡胶的有限元参数化模型,将对模型仿真所得结果与已有数据进行对比,验证了仿真模型的正确性,实现了环形橡胶径向刚度的快速计算.在此基础上,分析了内外圆柱面半径与轴向长度对环形橡胶简化径向刚度值的影响,研究了环形橡胶的径向刚度特性,确立了在环形橡胶实际设计中需要考虑的要点,为环形橡胶的设计提供了依据.
Abstract:
The finite element model of annular rubber based on ANSYS is built up.And the cantrast between the experimental data which are available is made and the analysis results of the finite element model verifies the validity of the model.The fast calculation of the rubber bush radial stiffness is achieved.Based on this model,the radial stiffness characteristics of rubber bush are studied by analyzing the influence of inner and outer radii and axial length on the non-dimensional values of radial stiffness.And sev...

备注/Memo

备注/Memo:
教育部春晖计划项目(z2005-1-23002);; 黑龙江省教育厅科学技术研究项目(11531051)
更新日期/Last Update: 2009-09-22