[1]宋双柱.基于UG和MoldFlow的相机外壳注塑模具设计[J].哈尔滨理工大学学报,2009,(03):16-19.
 SONG Shuang-zhu.Camera Shell Injection Mold Design Based on UG and MoldFlow[J].哈尔滨理工大学学报,2009,(03):16-19.
点击复制

基于UG和MoldFlow的相机外壳注塑模具设计()
分享到:

《哈尔滨理工大学学报》[ISSN:1007-2683/CN:23-1404/N]

卷:
期数:
2009年03期
页码:
16-19
栏目:
计算机与控制工程
出版日期:
2009-06-25

文章信息/Info

Title:
Camera Shell Injection Mold Design Based on UG and MoldFlow
作者:
宋双柱;
哈尔滨理工大学计算机与控制学院;
Author(s):
SONG Shuang-zhu
School of Computer Science and Technology; Harbin University of Science and Technology; Harbin 150080; China
关键词:
注塑模具 模流分析 UG MPI
Keywords:
Injection mold Mold flow analysis UG MPI
分类号:
TP391.72
文献标志码:
A
摘要:
针对传统注塑模具设计方法存在设计周期长、成本高且质量难以保证的不足,采用计算机辅助设计软件UG和有限元分析软件MoldFlow相结合的方法进行相机外壳的注塑模具设计,创建了相机外壳的三维实体模型和模流分析有限元模型,通过对注射过程中流动分析结果、冷却分析结果的仿真,调整了相机外壳注塑模具的冷却系统结构,最后采用UG/MoldWizard模块创建了经过优化和调整的注塑模具实体模型.
Abstract:
Traditional mold design methods have many disadvantages,such as long design cycle,high cost and difficult guarantee of quality.The mold of the camera shell is designed by combining the computer-aided design software UG and the finite-element analysis software MoldFlow.The three-dimensional solid model of camera shell and mold flow analysis model are created,and according to the simulation of the flow analysis and cooling analysis results,the cooling system structure of the camera mold is regulated.Finally t...
更新日期/Last Update: 2009-09-22